A range of non-expandable Server Appliances with single or redundant power supplies, available from 2U 6-bay up to 5U 48-bay, with hot swap SAS / SATA 3.5" drive bays which will also accept 2.5" drives.
Non-expandable Server Appliance with redundant power supplies, 2U with 6 x hot swap SAS / SATA drive bays.
Material: Heavy-duty cold-rolled steel.
Finish:
- Internal: zinc-plated with bright chromate
- External: texture-coated
Cooling: 4x 80mm ball-bearing fans + 2x 60mm ball-bearing fans on front panel
Power Supply: single 460w, 600w, also available in 460W or 600w redundant
PCI Extension: 3 full height and length slots with optional riser cards.or optional 7 slots low profile rear panel(IPC-SB1011)
Air Filter: Removable and washable
Controls: Power on/off and system reset
Indicators: Power and HDD LED's
Speaker: 0.4W built-in
Drive Bay: 1x5.25" + 1x3.5" FDD bays, 6x hot-swap drive bays for 3.5"x1" SATA HDD, 1x Slim-CD bay
Options:
- riser card
- slider rails
- 7 slots low profile rear panel
Temperature: 0°C (32°F)~50°C (122°F)
Humidity: 5%~95% non-condensing
Dimension: 482.6 x 685.58 x 88.2mm (WxDxH)
Gross Weight: 17kg
Server Appliances are constructed using standard Intel architecture, and will thus run any software designed to run on these systems. Software may be designated as general purpose Operating systems (Windows, NetWare, Linux, Open Solaris etc), virtualising operating systems (VMWare, Virtual Iron etc), dedicated NAS / iSCSI operating systems (Open-E, Open Filer, OpenNAS etc) or storage virtualising software which runs on standard operating systems (Datacore, Falconstor).
The number of different combinations of software and hardware components is too large to document individually; please contact ANS with details of your required solution.
LSI MegaRAID PCIe SAS RAID controller HBAs are accredited for use with RAIDFLEX Open Storage Appliances, and have a dedicated storage management GUI. These controllers are suitable for internal SAS connectivity with subsequent expansion through SAS expanders, and the external ports are suitable for adding JBOD storage to "non-expandable" appliances and third party servers.
Accusys ACS-61xxxx PCIe SATA RAID controller HBAs are accredited for use with RAIDFLEX Open Storage Appliances, and have a dedicated storage management GUI. These controllers range from 4-ports to 24-ports and are suitable for non-expandable arrays where only SATA drives are required.
RAIDFLEX A6206 Appliance Datasheet
iSCSI Interface Overview (to be added shortly)
Open Storage Appliance White Paper (to be added shortly)
Please contact ANS for Manuals, Performance Test Reports and Firmware Upgrades.
SATA HBAs
SAS HBAs
FC HBAs
Non-expandable Server Appliance with redundant power supplies, 2U with 8 x hot swap SAS / SATA drive bays.
Material: Heavy-duty cold-rolled steel
Finish:
- Internal - zinc-plated with bright chromate
- External - texture-coated
Cooling: 4 x 40mm + 2 x 80mm hotswap fans
Power Supply: 510w single EPS or 500Wx2 redundant PSU
PCI Extension: 3 x PCI via riser cards
Controls: Power on/off and system reset and USB port
Indicators: Power and HDD LED's, 2 x LAN
Drive Bay: 8 x SATA HotSwap bays + 1 x 2,5" internal HDD
Optional:
- Riser card
- 7 slots low profile rear panel
This chassis comes with standard friction rails.
Temperature: 0°C (32°F)~50°C (122°F)
Humidity: 5%~95% non-condensing
Dimension: 482.6 x 691.5 x 88mm (WxDxH)
Gross Weight: 18kg
Server Appliances are constructed using standard Intel architecture, and will thus run any software designed to run on these systems. Software may be designated as general purpose Operating systems (Windows, NetWare, Linux, Open Solaris etc), virtualising operating systems (VMWare, Virtual Iron etc), dedicated NAS / iSCSI operating systems (Open-E, Open Filer, OpenNAS etc) or storage virtualising software which runs on standard operating systems (Datacore, Falconstor).
The number of different combinations of software and hardware components is too large to document individually; please contact ANS with details of your required solution.
LSI MegaRAID PCIe SAS RAID controller HBAs are accredited for use with RAIDFLEX Open Storage Appliances, and have a dedicated storage management GUI. These controllers are suitable for internal SAS connectivity with subsequent expansion through SAS expanders, and the external ports are suitable for adding JBOD storage to "non-expandable" appliances and third party servers.
Accusys ACS-61xxxx PCIe SATA RAID controller HBAs are accredited for use with RAIDFLEX Open Storage Appliances, and have a dedicated storage management GUI. These controllers range from 4-ports to 24-ports and are suitable for non-expandable arrays where only SATA drives are required.
RAIDFLEX A6208 Appliance Datasheet
iSCSI Interface Overview (to be added shortly)
Open Storage Appliance White Paper (to be added shortly)
Please contact ANS for Manuals, Performance Test Reports and Firmware Upgrades.
SATA HBAs
SAS HBAs
FC HBAs
Non-expandable Server Appliance with redundant power supplies, 3U with 12 x hot swap SAS / SATA drive bays.
Materials: Heavy-duty cold-rolled steel
Finish: Inside / Body: Zinc-plated with bright chromate
Outsize / Front: Texture-coated
Cooling:
Middle - 2 x 40x28mm + 3 x 80x32mm hot-swap fans
Rear - 2 x 60x25mm easy-swap fans (optional 60x38mm upgrade)
Power Supply: 650W 2+1 hot-swap redundant PFC
Expansion: 7 x PCI slots (full height, full length)
Controls: Power on/off and system reset + 2 x USB ports
Indicators: Power, 2 x LAN and HDD LED's
Speakers:
System Board: Up to 12h(W) x 13h(D) E-ATX/SSI EEB 3.6 compliant motherboard
<st1:place w:st="on"><st1:placename w:st="on">Drive</st1:placename> <st1:placetype w:st="on">Bay</st1:placetype></st1:place>:
- External - 5.25" x 1; 3.5" 1; 3.5" hot-swap x 12; 2.5" hot-swap x 0
- Internal - 3.5" x 1; 2.5" x 0; Slim CD-Rom/DVD-Rom x 1; Slim FDD x 0
Temperature: 0°C (32°F)~50°C (122°F)
Humidity: 5%~95% non-condensing
Dimension: 482.6 x 685.8 x 887.9mm (WxDxH)
Gross Weight: 18kg
Server Appliances are constructed using standard Intel architecture, and will thus run any software designed to run on these systems. Software may be designated as general purpose Operating systems (Windows, NetWare, Linux, Open Solaris etc), virtualising operating systems (VMWare, Virtual Iron etc), dedicated NAS / iSCSI operating systems (Open-E, Open Filer, OpenNAS etc) or storage virtualising software which runs on standard operating systems (Datacore, Falconstor).
The number of different combinations of software and hardware components is too large to document individually; please contact ANS with details of your required solution.
LSI MegaRAID PCIe SAS RAID controller HBAs are accredited for use with RAIDFLEX Open Storage Appliances, and have a dedicated storage management GUI. These controllers are suitable for internal SAS connectivity with subsequent expansion through SAS expanders, and the external ports are suitable for adding JBOD storage to "non-expandable" appliances and third party servers.
Accusys ACS-61xxxx PCIe SATA RAID controller HBAs are accredited for use with RAIDFLEX Open Storage Appliances, and have a dedicated storage management GUI. These controllers range from 4-ports to 24-ports and are suitable for non-expandable arrays where only SATA drives are required.
RAIDFLEX A6312 Appliance Datasheet
iSCSI Interface Overview (to be added shortly)
Open Storage Appliance White Paper (to be added shortly)
Please contact ANS for Manuals, Performance Test Reports and Firmware Upgrades.
SATA HBAs
SAS HBAs
FC HBAs
Non-expandable Server Appliance with redundant power supplies, 4U with 16 x hot swap SAS / SATA drive bays.
Materials: Heavy-duty cold-rolled steel
Finish:
- Internal / Body: Zinc-plated with bright chromate
- External/ Front: Texture-coated
Cooling:
- Middle: 5 x 80 x 32mm easy-swap fans
- Rear: 2 x 60 x 25mm fans
Power Supply: 650W hot-swap PFC redundant PS
Expansion: 7 x PCI slots (full height, full length)
Controls: Power on/off, system reset and dual USB ports
Indicators: Power, LAN and HDD LEDfs
Speakers:
Drive Bays:
- External: 5.25" x 1; 3.5" x 0; 3.5" hot-swap x 16; 2.5" hot-swap x 0
- Internal: 3.5" x 0; 2.5" x 0; Slim CD-Rom/DVD-Rom x 1; Slim FDD x 1
Temperature: 0°C (32°F)~50°C (122°F)
Humidity: 5%~95% non-condensing
Dimension: 482.6 x 685.8 x 177.8mm (WxDxH)
Gross Weight: 34kg
Server Appliances are constructed using standard Intel architecture, and will thus run any software designed to run on these systems. Software may be designated as general purpose Operating systems (Windows, NetWare, Linux, Open Solaris etc), virtualising operating systems (VMWare, Virtual Iron etc), dedicated NAS / iSCSI operating systems (Open-E, Open Filer, OpenNAS etc) or storage virtualising software which runs on standard operating systems (Datacore, Falconstor).
The number of different combinations of software and hardware components is too large to document individually; please contact ANS with details of your required solution.
LSI MegaRAID PCIe SAS RAID controller HBAs are accredited for use with RAIDFLEX Open Storage Appliances, and have a dedicated storage management GUI. These controllers are suitable for internal SAS connectivity with subsequent expansion through SAS expanders, and the external ports are suitable for adding JBOD storage to "non-expandable" appliances and third party servers.
Accusys ACS-61xxxx PCIe SATA RAID controller HBAs are accredited for use with RAIDFLEX Open Storage Appliances, and have a dedicated storage management GUI. These controllers range from 4-ports to 24-ports and are suitable for non-expandable arrays where only SATA drives are required.
RAIDFLEX A6416 Appliance Datasheet
iSCSI Interface Overview (to be added shortly)
Open Storage Appliance White Paper (to be added shortly)
Please contact ANS for Manuals, Performance Test Reports and Firmware Upgrades.
SATA HBAs
SAS HBAs
FC HBAs
Non-expandable Server Appliance with redundant power supplies, 5U with 24 x hot swap SAS / SATA drive bays.
Material: Heavy-duty cold-rolled steel
Finish:
- Internal - zinc-plated with bright chromate
- External - texture-coated
Colour: Black
Cooling: 2 x 120mm Hot-Swap Blowers + 2 x 60x38mm Fans
Controls: Power on/off, System Reset, and Power Supply Alarm Reset
Indicators: Power, HDD, and LAN LED's
Drive Bays:
- Internal: 1 x Slim CD-ROM + 1 x 3.5" + 1 x 5.25"
- External: 24 x 3.5" Hot-Swap bays for SAS/SATA2 HDD
Power Supply: n+1 950W Redundant EPS
Brackets and sliders : Included
Connector on backplane side: mini SAS connector (SFF8087)
Temperature: 0°C (32°F)~50°C (122°F)
Humidity: 5%~95% non-condensing
Dimension: 482.6 x 643.2 x 221.1mm (WxDxH)
Gross Weight: 37kg
Server Appliances are constructed using standard Intel architecture, and will thus run any software designed to run on these systems. Software may be designated as general purpose Operating systems (Windows, NetWare, Linux, Open Solaris etc), virtualising operating systems (VMWare, Virtual Iron etc), dedicated NAS / iSCSI operating systems (Open-E, Open Filer, OpenNAS etc) or storage virtualising software which runs on standard operating systems (Datacore, Falconstor).
The number of different combinations of software and hardware components is too large to document individually; please contact ANS with details of your required solution.
LSI MegaRAID PCIe SAS RAID controller HBAs are accredited for use with RAIDFLEX Open Storage Appliances, and have a dedicated storage management GUI. These controllers are suitable for internal SAS connectivity with subsequent expansion through SAS expanders, and the external ports are suitable for adding JBOD storage to "non-expandable" appliances and third party servers.
Accusys ACS-61xxxx PCIe SATA RAID controller HBAs are accredited for use with RAIDFLEX Open Storage Appliances, and have a dedicated storage management GUI. These controllers range from 4-ports to 24-ports and are suitable for non-expandable arrays where only SATA drives are required.
RAIDFLEX A6524 Appliance Datasheet
iSCSI Interface Overview (to be added shortly)
Open Storage Appliance White Paper (to be added shortly)
Please contact ANS for Manuals, Performance Test Reports and Firmware Upgrades.
SATA HBAs
SAS HBAs
FC HBAs
Non-expandable Server Appliance with redundant power supplies, 5U with 48* x hot swap (currently only) SATA drive bays.
* 48 drives arranged vertically (see gallery)
Materials: Heavy-duty cold-rolled steel
Finish:
- Internal: Zinc-plated with bright chromate
- External: Texture-coated
Cooling: Rear: 9 x 40 x 56mm hot-swap fans for HDD Bays + 4 x 60 x 38mm fans for MB
Power Supply: 135R 1350W 3+1 redundant power supply (4 x 500W modules)
Expansion: Up to 7 x PCI slots (full height, full length) (depends on the MB)
Controls: Power on/off, system reset + USB Indicators for Power, LAN and HDD LED’s
Drive Bays:
- External: 5.25" x 0; 3.5" x 0; 3.5" hot-swap x 48; 2.5" hot-swap x 0
- Internal: 3.5" x 0; Slim CD-Rom/DVD-Rom x 0; Slim FDD x 0
Temperature: 0°C (32°F)~50°C (122°F)
Humidity: 5%~95% non-condensing
Dimension: 482.6 x 863.6 x 222.25mm (WxDxH)
Gross Weight: 52kg
Server Appliances are constructed using standard Intel architecture, and will thus run any software designed to run on these systems. Software may be designated as general purpose Operating systems (Windows, NetWare, Linux, Open Solaris etc), virtualising operating systems (VMWare, Virtual Iron etc), dedicated NAS / iSCSI operating systems (Open-E, Open Filer, OpenNAS etc) or storage virtualising software which runs on standard operating systems (Datacore, Falconstor).
The number of different combinations of software and hardware components is too large to document individually; please contact ANS with details of your required solution.
LSI MegaRAID PCIe SAS RAID controller HBAs are accredited for use with RAIDFLEX Open Storage Appliances, and have a dedicated storage management GUI. These controllers are suitable for internal SAS connectivity with subsequent expansion through SAS expanders, and the external ports are suitable for adding JBOD storage to "non-expandable" appliances and third party servers.
Accusys ACS-61xxxx PCIe SATA RAID controller HBAs are accredited for use with RAIDFLEX Open Storage Appliances, and have a dedicated storage management GUI. These controllers range from 4-ports to 24-ports and are suitable for non-expandable arrays where only SATA drives are required.
RAIDFLEX A6548 Appliance Datasheet
iSCSI Interface Overview
NAS Overview
Open Storage Appliance White Paper (to be added shortly)
Please contact ANS for Manuals, Performance Test Reports and Firmware Upgrades.
SATA HBAs
SAS HBAs
FC HBAs