RAIDFLEX A6206 2U 6-bay 3.5" Storage Appliance

Non-expandable Server Appliance with redundant power supplies, 2U with 6 x hot swap SAS / SATA drive bays.

3 x PCI slots via riser or 7 x low profile
External Fixed Drive Bays: 1 x 3.5"; 0 x 5.25"
Internal Fixed Drive Bays: 0 x 3.5"; 0 x 2.5"
Slim Optical: 1; Slim Floppy: 0
Front USB Ports: 2

Gallery

Specification

Material: Heavy-duty cold-rolled steel.

Finish:

- Internal: zinc-plated with bright chromate

- External: texture-coated

Cooling: 4x 80mm ball-bearing fans + 2x 60mm ball-bearing fans on front panel

Power Supply: single 460w, 600w, also available in 460W or 600w redundant

PCI Extension: 3 full height and length slots with optional riser cards.or optional 7 slots low profile rear panel(IPC-SB1011)

Air Filter: Removable and washable

Controls: Power on/off and system reset

Indicators: Power and HDD LED's

Speaker: 0.4W built-in

Drive Bay: 1x5.25" + 1x3.5" FDD bays, 6x hot-swap drive bays for 3.5"x1" SATA HDD, 1x Slim-CD bay

Options:

- riser card

- slider rails

- 7 slots low profile rear panel

Environment

Temperature: 0°C (32°F)~50°C (122°F)

Humidity: 5%~95% non-condensing

Dimension: 482.6 x 685.58 x 88.2mm (WxDxH)

Gross Weight: 17kg

Software

Operating Systems and Application Software

Server Appliances are constructed using standard Intel architecture, and will thus run any software designed to run on these systems. Software may be designated as general purpose Operating systems (Windows, NetWare, Linux, Open Solaris etc), virtualising operating systems (VMWare, Virtual Iron etc), dedicated NAS / iSCSI operating systems (Open-E, Open Filer, OpenNAS etc) or storage virtualising software which runs on standard operating systems (Datacore, Falconstor).

The number of different combinations of software and hardware components is too large to document individually; please contact ANS with details of your required solution.

Storage Array Management Software

LSI MegaRAID PCIe SAS RAID controller HBAs are accredited for use with RAIDFLEX Open Storage Appliances, and have a dedicated storage management GUI. These controllers are suitable for internal SAS connectivity with subsequent expansion through SAS expanders, and the external ports are suitable for adding JBOD storage to "non-expandable" appliances and third party servers.

Accusys ACS-61xxxx PCIe SATA RAID controller HBAs are accredited for use with RAIDFLEX Open Storage Appliances, and have a dedicated storage management GUI. These controllers range from 4-ports to 24-ports and are suitable for non-expandable arrays where only SATA drives are required.