Materials: Heavy-duty cold-rolled steel

Finish:

- Internal / Body: Pre-plated SPGC

- External / Front: Texture-coated

Cooling: Middle - 3 x 4028mm + 2 x 80 x 32mm hot-swap fans

Power Supply: 500W 1+1 hot-swap redundant PFC

Expansion: 3xPCI slot via riser card(full height,full length) or 7xPCI slot low profile.

Drive Bay:12x3.5" hot-swap

Backplane:

- XPSA21   SAS3.0 (Single Expander)

- XPSA22   SAS3.0 (Dual Expander)

Temperature: 0°C (32°F)~50°C (122°F)

Humidity: 5%~95% non-condensing

Dimension: 482.6 x 685.8 x 88.9mm (WxDxH)

Gross Weight: 18kg

Server Appliances are constructed using standard Intel architecture, and will thus run any software designed to run on these systems. Software may be designated as general purpose Operating systems (Windows, NetWare, Linux, Open Solaris etc), virtualising operating systems (VMWare, Virtual Iron etc), dedicated NAS / iSCSI operating systems (Open-E, Open Filer, OpenNAS etc) or storage virtualising software which runs on standard operating systems (Datacore, Falconstor).

The number of different combinations of software and hardware components is too large to document individually; please contact ANS with details of your required solution.

LSI MegaRAID PCIe SAS RAID controller HBAs are accredited for use with RAIDFLEX Open Storage Appliances, and have a dedicated storage management GUI. These controllers are suitable for internal SAS connectivity with subsequent expansion through SAS expanders, and the external ports are suitable for adding JBOD storage to "non-expandable" appliances and third party servers.

Accusys ACS-61xxxx PCIe SATA RAID controller HBAs are accredited for use with RAIDFLEX Open Storage Appliances, and have a dedicated storage management GUI. These controllers range from 4-ports to 24-ports and are suitable for non-expandable arrays where only SATA drives are required.

RAIDFLEX B6000 Appliance Datasheet

iSCSI Interface Overview (to be added shortly)

Open Storage Appliance White Paper (to be added shortly)

Please contact ANS for Manuals, Performance Test Reports and Firmware Upgrades.

iSCSI Interface Overview

NAS Overview

SATA HBAs

SAS HBAs

FC HBAs

Host Interface per IO Module(mini SAS 4x connector): single

Expansion interface per IO Module(mini SAS xconnector): single(or used as host)

Transfer speed: 1,200MB/sec per connector

Drive interface: 3Gbps dual ported SAS,1.5/3Gbps single ported SATA

Dual ported SATA support: optional interposer boards

Drive RPM: up to 15,000

Drive form factor: 3.5",1"height

Admin/Firmware Update(in-band&out-of-band): Windows GUI,Serial

LED Indicators,Audible Alarm: yes

Material: 1.2mm Heavy Duty Cold-Rolled Steel

Finish: Internal - Zinc-plated with bright chromate

External: Textured coated

Cooling: 3 x 97mm hot-swap blowers

Power supply: 460W 1+1 H/S Redundant Power Supplies

Drive bays: 16 x H/S SAS 3.0G bays

Universal A/C Input:100-240V AC full range

Dimensions: (H)x(W)x(D) 130mmx440mmx570mm

Weight: 19.5kgs

Backplane Design

· Vitesse VSC7153 24-port PHY Expander

· Dual port design for fail-over

· 4 x 300MB/S upstream link to Initiator

· Daisy-chainable or cross-over uplink

· 128+ devices routing table depth (programmable and customisable)

· Using latest Molex miniSAS 4X multilane connector

· Supports SES

Temperature: 0°C (32°F)~50°C (122°F)

Humidity: 5%~95% non-condensing

Dimension: 482.6 x 685.8 x 133.35mm (WxDxH)

Gross Weight: 22.5kg

Server Appliances are constructed using standard Intel architecture, and will thus run any software designed to run on these systems. Software may be designated as general purpose Operating systems (Windows, NetWare, Linux, Open Solaris etc), virtualising operating systems (VMWare, Virtual Iron etc), dedicated NAS / iSCSI operating systems (Open-E, Open Filer, OpenNAS etc) or storage virtualising software which runs on standard operating systems (Datacore, Falconstor).

The number of different combinations of software and hardware components is too large to document individually; please contact ANS with details of your required solution.

LSI MegaRAID PCIe SAS RAID controller HBAs are accredited for use with RAIDFLEX Open Storage Appliances, and have a dedicated storage management GUI. These controllers are suitable for internal SAS connectivity with subsequent expansion through SAS expanders, and the external ports are suitable for adding JBOD storage to "non-expandable" appliances and third party servers.

Accusys ACS-61xxxx PCIe SATA RAID controller HBAs are accredited for use with RAIDFLEX Open Storage Appliances, and have a dedicated storage management GUI. These controllers range from 4-ports to 24-ports and are suitable for non-expandable arrays where only SATA drives are required.

RAIDFLEX B6000 Appliance Datasheet

iSCSI Interface Overview (to be added shortly)

Open Storage Appliance White Paper (to be added shortly)

Please contact ANS for Manuals, Performance Test Reports and Firmware Upgrades.

Materials: Heavy-duty cold-rolled steel

Finish:

- Internal / Body: Pre-plated SPGC

- External / Front: Texture-coated

Cooling: Middle - 3 x 4028mm + 2 x 80 x 32mm hot-swap fans

Power Supply: 500W 1+1 hot-swap redundant PFC

Expansion: 3xPCI slot via riser card(full height,full length) or 7xPCI slot low profile.

Drive Bay:12x3.5" hot-swap

Backplane:

- XPSA21   SAS3.0 (Single Expander)

- XPSA22   SAS3.0 (Dual Expander)

Temperature: 0°C (32°F)~50°C (122°F)

Humidity: 5%~95% non-condensing

Dimension: 482.6 x 685.8 x 88.9mm (WxDxH)

Gross Weight: 18kg

RAIDFLEX B6000 Appliance Datasheet

iSCSI Interface Overview (to be added shortly)

Open Storage Appliance White Paper (to be added shortly)

Please contact ANS for Manuals, Performance Test Reports and Firmware Upgrades.