SAS-expandable Server Appliance with redundant hot-swap power supplies, 3U with 16 x hot swap SAS / SATA 3.5" (2.5" compatible) drive bays. Scalable to a total of 96 drives when fitted with (a) single or dual redundant SAS expander(s).
Host Interface per IO Module(mini SAS 4x connector): single
Expansion interface per IO Module(mini SAS xconnector): single(or used as host)
Transfer speed: 1,200MB/sec per connector
Drive interface: 3Gbps dual ported SAS,1.5/3Gbps single ported SATA
Dual ported SATA support: optional interposer boards
Drive RPM: up to 15,000
Drive form factor: 3.5",1"height
Admin/Firmware Update(in-band&out-of-band): Windows GUI,Serial
LED Indicators,Audible Alarm: yes
Material: 1.2mm Heavy Duty Cold-Rolled Steel
Finish: Internal - Zinc-plated with bright chromate
External: Textured coated
Cooling: 3 x 97mm hot-swap blowers
Power supply: 460W 1+1 H/S Redundant Power Supplies
Drive bays: 16 x H/S SAS 3.0G bays
Universal A/C Input:100-240V AC full range
Dimensions: (H)x(W)x(D) 130mmx440mmx570mm
Weight: 19.5kgs
Backplane Design
· Vitesse VSC7153 24-port PHY Expander
· Dual port design for fail-over
· 4 x 300MB/S upstream link to Initiator
· Daisy-chainable or cross-over uplink
· 128+ devices routing table depth (programmable and customisable)
· Using latest Molex miniSAS 4X multilane connector
· Supports SES
Temperature: 0°C (32°F)~50°C (122°F)
Humidity: 5%~95% non-condensing
Dimension: 482.6 x 685.8 x 133.35mm (WxDxH)
Gross Weight: 22.5kg
Server Appliances are constructed using standard Intel architecture, and will thus run any software designed to run on these systems. Software may be designated as general purpose Operating systems (Windows, NetWare, Linux, Open Solaris etc), virtualising operating systems (VMWare, Virtual Iron etc), dedicated NAS / iSCSI operating systems (Open-E, Open Filer, OpenNAS etc) or storage virtualising software which runs on standard operating systems (Datacore, Falconstor).
The number of different combinations of software and hardware components is too large to document individually; please contact ANS with details of your required solution.
LSI MegaRAID PCIe SAS RAID controller HBAs are accredited for use with RAIDFLEX Open Storage Appliances, and have a dedicated storage management GUI. These controllers are suitable for internal SAS connectivity with subsequent expansion through SAS expanders, and the external ports are suitable for adding JBOD storage to "non-expandable" appliances and third party servers.
Accusys ACS-61xxxx PCIe SATA RAID controller HBAs are accredited for use with RAIDFLEX Open Storage Appliances, and have a dedicated storage management GUI. These controllers range from 4-ports to 24-ports and are suitable for non-expandable arrays where only SATA drives are required.
RAIDFLEX B6000 Appliance Datasheet
iSCSI Interface Overview (to be added shortly)
Open Storage Appliance White Paper (to be added shortly)
Please contact ANS for Manuals, Performance Test Reports and Firmware Upgrades.
SATA HBAs
SAS HBAs
FC HBAs