Bridges
A comprehensive range of bridges to enable interconnection of devices with different interfaces.
SCSI-IDE
U160 SCSI-IDE
- AEC-7726Q
AEC-7726Q
LVD 160MB/s SCSI-to-IDE Bridge Adapter
- LVD SCSI interface for up to 160MB/sec data transfer rate
- Supports ATA 66/100/133 Hard Drives
- Supports SCSI Command Queuing for RAID
- Selectable SCSI ID from 0 to 15
- Dimension: 9.8cm x 2.5cm x 2.5cm (L x W x H)
- ARS-2000LFS
ARS-2000LFS
LVD SCSI to IDE Bridge Adapter Tray
- LVD SCSI interface for up to 160MB/Sec data transfer rate
- Supports ATA 66/100 and ATA 133 hard drives
- Selectable SCSI ID from 0 to 15
- Dimensions: 13.8cm x 10.2cm x 1.3cm (L x W x H)
ARS-2100Q
- ARS-2100Q
160MB/s LVD SCSI to IDE Bridge Adapter
- LVD SCSI interface for up to 160MB/sec data transfer rate
- Supports ATA 66/100/133 Hard Drives
- Selectable SCSI ID from 0 to 15
- Dimensions: 11.5cm x 7.1cm x 2cm (L x W x H)
- ARS-2120
ARS-2120
LVD SCSI to IDE Bridge Adapter Tray
- LVD SCSI interface for up to 160MB/sec data transfer rate
- Supports 2 x ATA 66/100/133 Hard Drives as JBOD or Normal
- Selectable SCSI ID from 0 to 15
- Dimension: 11.5cm x 7.1cm x 2cm (L x W x H)
U2W SCSI-IDE
- AEC-7720U
AEC-7722
LVDSCSI-to-IDE Bridge Adapter
- LVD SCSI interface for up to 80MB/sec data transfer rate
- Supports ATAPI Device, CD-ROM, CR-R/RW, DVD
- Selectable SCSI ID from 0 to 15
- Dimension: 12cm x 3.5cm x 2.4cm (L x W x H)
UW SCSI-IDE
AEC-7720UW
- AEC-7720UW
Ultra Wide SCSI-to-IDE Bridge Adapter
- Ultra Wide SCSI, up to 40MB/sec data transfer rate
- Supports DMA 66/100/133 hard drives
- Selectable SCSI ID from 0 to 15
- Full Ultra Wide SCSI target features support
ARS-2000FW
- ARS-2000FW
Ultra Wide SCSI-to-IDE Bridge Adapter Tray
- Ultra Wide SCSI, up to 40MB/sec data transfer rate
- Supports DMA 66/100/133 hard drives
- Selectable SCSI ID from 0 to 15
- Full Ultra Wide SCSI target features support
U SCSI-IDE
- ARS-2000FU
ARS-2000FU
Ultra SCSI-to-IDE Bridge Adapter Tray
- Ultra SCSI interface for up to 20MB/sec data transfer rate
- Ultra-DMA 33/66/100/133 interface for IDE device
- Selectable onboard active terminator
- Programmable IDE access, PIO mode 0,1,2,3,4
- Multiword DMA mode 0,1,2
- Full SCSI target features support
- AEC-7720U
AEC-7720U
Ultra SCSI-to-IDE Bridge Adapter
- IDE ATAPI devices such as CD-ROM, CD-R/RW and DVD-ROM
- SCSI host interface synchronous transfer rate up to 20 MB/sec
- Selectable SCSI ID from 0 to 7
- Full Ultra SCSI target features support
SCSI-SATA
AEC-7730A
- AEC-7730A
LVD to SATA Bridge Adapter
- LVD SCSI interface for up to 160MB/sec data transfer rate
- Support SATA I and II Hard Disk Drives *
- Selectable SCSI ID from 0 to 15
- Dimension: 9.8cm x 2.5cm x 2.5cm (L x W x H
* Drive compatibility list
- AEC-7730SA
AEC-7730SA
LVD SCSI to SATA Bridge Adapter (for ATAPI)
- LVD SCSI interface for up to 80MB/sec data transfer rate
- Support SATA Optical Drives
- Selectable SCSI ID from 0 to 15
- Dimensions: 9.8cm x 2.5cm x 2.5cm (L x W x H)
* Drive compatibility list
- ARS-2000SU
ARS-2000SU
Ultra Single-ended SCSI to SATA II Bridge Box for 2.5” SATA Drives
- Standard 3.5" form-factor contains 2.5" SATA 1 and II Drive
- Ultra SCSI interface – supports data transfers at up to 20MB/s
- 50-pin Ultra SCSI interface
- SCSI ID can be set from 0~7
- Dimensions: 14.6cm x 10.1cm x 2.5cm (LxWxH)
- ARS-2160
ARS-2160
Ultra160 SCSI-to-SATA II Bridge Box for 2.5” SATA Drives
- LVD SCSI interface for up to 160MB/sec data transfer rate
- 68-pin interface
- Supports 2.5" SATA I and II Disk Drives *
- Supports SCSI RAID
- Selectable SCSI ID from 0 to 15
- Dimensions:14.6cm x 10.1cm x 2.5cm (LxWxH)
* Drive compatibility list
- ARS-2320
ARS-2320
Ultra 320 SCSI to SATA II Bridge Box for 2.5” SATA Drives
- LVD SCSI interface for up to 320MB/sec data transfer rate
- 68-pin SCSI connector
- Supports 2.5" SATA I and II Drives *
- Supports SCSI RAID
- Selectable SCSI ID from 0 to 15
- Dimensions: 14.6cm x 10.1cm x 2.5cm (LxWxH)
* Drive compatibility list
- ARS-2320H
ARS-2320H
Ultra320 SCSI to SATA II Bridge Box for 2.5” SATA Drives
- LVD SCSI 320MB/sec data transfer rate
- 80-pin hot swap SCSI connector
- Supports 2.5” SATA I and II Drives *
- Supports SCSI RAID
- Selectable SCSI ID from 0 to 15
- Dimensions: 14.6cm x 10.1cm x 2.5cm (LxWxH)
* Drive compatibility list
SATA-IDE
- AEC-7900A
AEC-7900A
Serial ATA to IDE Bridge Adapter
- Converts ATA and ATAPI devices to SATA devices, enables hot swap
- Complies with Serial ATA 1.5Gbps
- Supports Ultra ATA 33/66/100/133, both ATA/ATAPI mode
- Supports PIO mode from 0 to 4
- Compatible with Serial ATA control chip on Intel ICH5 motherboard
- Compatible with ACARD, Marvell or Silicon Image Serial ATA RAID card
AEC-7923
SATA II-to-IDE Bridge Adapter
- Complies with Serial ATA 1.5/3Gbps and SATA II
- Supports Ultra DMA mode 0 to 6 with data rate up to 200MB/s
- Supports PIO mode 0 to 4
- Converts ATA and ATAPI devices to SATA devices, enables hot swap
- Supports both HDD and CD/DVD drive
- Compatible with main brand motherboards/adapters
IDE-SATA
ARS-2133
- ARS-2133
IDE-to-SATA Bridge Adapter Tray
- Supports single 2.5” SATA hard drive
- High-efficiency IDE transfer (ATA133MB/s)
- LED indicator to display read/write status
- Supports Master/Slave/Cable Select settings
- Same mechanism as 3.5” hard drives
- Dimensions: 131mm x 101.6mm x 23mm (LxWxH)
ARS-4432H
- ARS-4432H
Host IDE with Single Port 1.5G eSATA Port PCI HBA
- One IDE port for host, one 7-pin external eSATA port
- Complies with Serial ATA 1.5G specification
- Supports Ultra DMA mode 0 to 6 with data transfer rate up to 133MB/s
- Supports PIO mode 0 to 4
- One LED displayed on the bracket of one eSATA port
- Compatible with main brand motherboards
ARS-4433H
- ARS-4433H
Host IDE with Dual 3.0G eSATA Port PCI HBA
- One IDE port for host, two 7-pin external eSATA ports
- Complies with Serial ATA II specification
- Supports Ultra DMA mode 0 to 6 with data transfer rate up to 133MB/s
- Supports PIO mode 0 to 4
- One LED displayed on the bracket for each eSATA port
- Compatible with main brand motherboards
