IDE-to-SATA Bridge Adapter

• ACARD IDE-to-SATA Bridge Controller
• One 7-pin internal SATA port for device (Vertical SATA connector with latch key and metal cover)
• High-efficiency IDE transfer (ATA 133MB/sec)
• Power requirement: 5V
• Support 48-bit LBA addressing mode ("Big Drive" Technology)
• ATAPI packet command set
• Supports Ultra DMA mode 0 to 6 with data rate up to 133MB/sec
• Serial ATA 1.5G/3G selective jumper on-board

IDE-to-SATA Bridge Adapter Tray

• Supports single 2.5” SATA hard drive
• High-efficiency IDE transfer (ATA133MB/s)
• LED indicator to display read/write status
• Supports Master/Slave/Cable Select settings
• Same mechanism as 3.5” hard drives
• Dimensions: 131mm x 101.6mm x 23mm (LxWxH)