Bridges
A comprehensive range of bridges to enable interconnection of devices with different interfaces.
SCSI-IDE
- AEC-7726Q
AEC-7726Q
LVD 160MB/s SCSI-to-IDE Bridge Adapter
- LVD SCSI interface for up to 160MB/sec data transfer rate
- Supports ATA 66/100/133 Hard Drives
- Supports SCSI Command Queuing for RAID
- Selectable SCSI ID from 0 to 15
- Dimensions: 9.8cm x 2.5cm x 2.5cm (L x W x H)
- ARS-2000LFS
ARS-2000LFS
LVD SCSI to IDE Bridge Adapter Tray
- LVD SCSI interface for up to 160MB/Sec data transfer rate
- Supports ATA 66/100 and ATA 133 hard drives
- Selectable SCSI ID from 0 to 15
- Dimensions: 13.8cm x 10.2cm x 1.3cm (L x W x H)
ARS-2000LHS
- ARS-2000LHS
LVD SCSI to IDE Bridge Adapter Tray
- Design for 2.5"half height de facto form factor
- Supports ATA 66/100 and ATA 133 hard drives
- Onboard flash ROM for easy firmware upgrade
- Selectable SCSI ID from 0 to 15
- LVD SCSI interface for up to 160MB/Sec data transfer
rate - Dimensions: 13.8cm x 10.2cm x 1.3cm (L x W x H)
ARS-2100Q
- ARS-2100Q
160MB/s LVD SCSI to IDE Bridge Adapter
- LVD SCSI interface for up to 160MB/sec data transfer rate
- Supports ATA 66/100/133 Hard Drives
- Selectable SCSI ID from 0 to 15
- Dimensions: 11.5cm x 7.1cm x 2cm (L x W x H)
- ARS-2120
ARS-2120
LVD SCSI to IDE Bridge Adapter Tray
- LVD SCSI interface for up to 160MB/sec data transfer rate
- Supports 2 x ATA 66/100/133 Hard Drives as JBOD or Normal
- Selectable SCSI ID from 0 to 15
- Dimensions: 11.5cm x 7.1cm x 2cm (L x W x H)
ARS-2110
- ARS-2110
LVD SCSI-to-IDE Write Block Kit
- LVD SCSI interface for up to 160MB/Sec data transfer rate
- Supports ATA 66/100 /133 hard drives
- Cross-platform operation supports: Windows
98/Me/NT/2000/XP/Windows Server 2003, Linux - Onboard flash ROM for easy firmware upgrade
- Selectable SCSI ID from 0 to 15
- Dimensions: 7.5cm x 7.1cm x 2cm (L x W x H)
- AEC-7720U
AEC-7722
LVDSCSI-to-IDE Bridge Adapter
- LVD SCSI interface for up to 80MB/sec data transfer rate
- Supports ATAPI Device, CD-ROM, CR-R/RW, DVD
- Selectable SCSI ID from 0 to 15
- Dimensions: 12cm x 3.5cm x 2.4cm (L x W x H)
AEC-7720UW
- AEC-7720UW
Ultra Wide SCSI-to-IDE Bridge Adapter
- Ultra Wide SCSI, up to 40MB/sec data transfer rate
- Supports DMA 66/100/133 hard drives
- Selectable SCSI ID from 0 to 15
- Full Ultra Wide SCSI target features support
ARS-2000FW
- ARS-2000FW
Ultra Wide SCSI-to-IDE Bridge Adapter Tray
- Ultra Wide SCSI, up to 40MB/sec data transfer rate
- Supports DMA 66/100/133 hard drives
- Selectable SCSI ID from 0 to 15
- Full Ultra Wide SCSI target features support
- AEC-7720U
AEC-7720U
Ultra SCSI-to-IDE Bridge Adapter
- IDE ATAPI devices such as CD-ROM, CD-R/RW and DVD-ROM
- SCSI host interface synchronous transfer rate up to 20 MB/sec
- Selectable SCSI ID from 0 to 7
- Full Ultra SCSI target features support
- ARS-2000FU
ARS-2000FU
Ultra SCSI-to-IDE Bridge Adapter Tray
- Ultra SCSI interface for up to 20MB/sec data transfer rate
- Ultra-DMA 33/66/100/133 interface for IDE device
- Selectable onboard active terminator
- Programmable IDE access, PIO mode 0,1,2,3,4
- Multiword DMA mode 0,1,2
- Full SCSI target features support
SCSI-SATA
AEC-7730SR
- AEC-7730SR
LVD SCSI-to-SATA Bridge Adapter (for RDX-drive)
- LVD SCSI interface for up to 80MB/sec data transfer rate
- Support RDX Drive
- Onboard flash ROM for easy firmware upgrade
- AEC-7730SA
AEC-7730SA
LVD SCSI to SATA Bridge Adapter (for ATAPI)
- LVD SCSI interface for up to 80MB/sec data transfer rate
- Support SATA Optical Drives
- Selectable SCSI ID from 0 to 15
- Dimensions: 9.8cm x 2.5cm x 2.5cm (L x W x H)
* Drive compatibility list
AEC-7732
- AEC-7732
LVD SCSI to SATA Bridge Adapter (for SATA ODD)
- LVD SCSI interface for up to 160MB/sec data transfer rate.
- Support SATA ODD.
- Cross-platform operation supports Windows® 2000/XP/2003 Server/Vista/Windows 7, Linux
AEC-7732U
- AEC-7732U
Ultra SCSI to SATA Bridge Adapter (for SATA ODD)
- 50pin Ultra SCSI interface.
- supports data transfers at up to 20MB/s
- Support SATA BD / DVD.
- ARS-2000SUP
ARS-2000SUP
Ultra Single-ended SCSI to SATA II Bridge Box for 2.5” SATA Drives
- ACARD SCSI-to-SATA Bridge Controller
- Ultra SCSI interface – supports data transfers at up to 20MB/s
- 50-pin Ultra SCSI interface
- Supports 2.5" SATA I and SATA II HDDs
- Supports industrial-grade computers
- Built-in Flash ROM for easy firmware upgrades
- SCSI ID can be set from 0~7
- Dimensions: 14.6cm x 10.1cm x 2.5cm (L x W x H)
*Note: See product compatibility list for a list of supported SATA HDDs
- ARS-2160
ARS-2160
Ultra160 SCSI-to-SATA II Bridge Box for 2.5” SATA Drives
- LVD SCSI interface for up to 160MB/sec data transfer rate
- 68-pin interface
- Supports 2.5" SATA I and II Disk Drives *
- Supports SCSI RAID
- Selectable SCSI ID from 0 to 15
- Dimensions:14.6cm x 10.1cm x 2.5cm (LxWxH)
* Drive compatibility list
ARS-2160H
- ARS-2160H
Ultra160 SCSI-to-SATA II Bridge Box for 2.5" SATA Hard Disk Drive
Supports SCSI Hot Swap
- ACARD SCSI-to-SATA Bridge Controller
- LVD SCSI interface for up to 160MB/sec data transfer rate
- 80pins Hot swap design for SCSI interface
- Support 2.5” SATA I、II Hard Disk Drives*
- Support SCSI RAID card
- Onboard flash ROM for easy firmware upgrade
- Selectable SCSI ID from 0 to 15
- Dimension：14.6cm x 10.1cm x 2.5cm (L x W x H)
*Note: Please refer to Compatibility List for SATA HDD
- ARS-2320
ARS-2320
Ultra 320 SCSI to SATA II Bridge Box for 2.5” SATA Drives
- LVD SCSI interface for up to 320MB/sec data transfer rate
- 68-pin SCSI connector
- Supports 2.5" SATA I and II Drives *
- Supports SCSI RAID
- Selectable SCSI ID from 0 to 15
- Dimensions: 14.6cm x 10.1cm x 2.5cm (LxWxH)
* Drive compatibility list
- ARS-2320S
ARS-2320S
Ultra320 SCSI to SATA II Bridge Box for 2.5” SATA Drives
non Hot SWAP
- ACARD SCSI-to-SATA Bridge Controller
- LVD SCSI interface for up to 320MB/sec data transfer rate
- 80pins SCA-2 for SCSI interface
- Support 2.5” SATA I, II Hard Disk Drives*
- On-board flash ROM for easy firmware upgrade
- Selectable SCSI ID from 0 to 15
- Dimension: 14.6cm x 10.1cm x 2.5cm (L x W x H)
*Note: Please refer to Compatibility List for SATA HDDs
SATA-IDE
- AEC-7900A
AEC-7900A
Serial ATA to IDE Bridge Adapter
- Converts ATA and ATAPI devices to SATA devices, enables hot swap
- Complies with Serial ATA 1.5Gbps
- Supports Ultra ATA 33/66/100/133, both ATA/ATAPI mode
- Supports PIO mode from 0 to 4
- Compatible with Serial ATA control chip on Intel ICH5 motherboard
- Compatible with ACARD, Marvell or Silicon Image Serial ATA RAID card
AEC-7923
SATA II-to-IDE Bridge Adapter
- Complies with Serial ATA 1.5/3Gbps and SATA II
- Supports Ultra DMA mode 0 to 6 with data rate up to 200MB/s
- Supports PIO mode 0 to 4
- Converts ATA and ATAPI devices to SATA devices, enables hot swap
- Supports both HDD and CD/DVD drive
- Compatible with main brand motherboards/adapters
IDE-SATA
AEC-7923H
- AEC-7923H
IDE-to-SATA Bridge Adapter
- ACARD IDE-to-SATA Bridge Controller
- One 7-pin internal SATA port for device (Vertical SATA connector with latch key and metal cover)
- High-efficiency IDE transfer (ATA 133MB/sec)
- Power requirement: 5V
- Support 48-bit LBA addressing mode ("Big Drive" Technology)
- ATAPI packet command set
- Supports Ultra DMA mode 0 to 6 with data rate up to 133MB/sec
- Serial ATA 1.5G/3G selective jumper on-board
ARS-2133
- ARS-2133
IDE-to-SATA Bridge Adapter Tray
- Supports single 2.5” SATA hard drive
- High-efficiency IDE transfer (ATA133MB/s)
- LED indicator to display read/write status
- Supports Master/Slave/Cable Select settings
- Same mechanism as 3.5” hard drives
- Dimensions: 131mm x 101.6mm x 23mm (LxWxH)
